-
Curtains & Backdrops
add remove
-
Stage Curtains and Backdrops
add remove
- Stage and Auditorium Curtains and Drapery
- School Stage Curtains and Drapery
- Church Curtains and House of Worship Drapery
- Acoustic and Sound Absorbing Curtains
- Theatrical Curtains for Commercial, Architectural, and Themed Environments
- Backdrops for Stage, Studio and Theater
- Arena Masking
- Rain Curtains
- Event Drapery
- Stage Skirting
-
Stage Curtains and Backdrops
add remove
-
Shop Fabrics & Hardware
add remove
-
Theatrical Fabrics
add remove
- Velour
- Commando Cloth and Duvetyne
- Sharkstooth Scrim and Leno
- Lining Fabrics
- Satin Fabrics
- Muslin
- Canvas, Burlap and Gauze
- Event Fabrics
- Specialty Fabrics
- Nylafleece® Nylon Puppet Fleece
- Keying Fabrics / Chroma Key Fabrics
- Metallic Fabrics
- Sheer Fabrics
- Textured Fabrics
- Projection Fabrics
- Stretch Fabrics
- Acoustical Fabrics
- Pipe and Drape add remove
-
Theatrical Fabrics
add remove
- Rigging add remove
-
Stage Curtain Resources
add remove
-
Stage Curtain Resources
add remove
- Stage Curtain FAQ
- Flame Retardancy Ratings
- How to Measure Existing Stage Curtains
- How to Measure for New Stage Curtains
- School Curtain Lettering and Fringe
- Specialty Stage Curtains
- Stage Curtain Care
- Stage Curtain Color Designer
- Stage Curtain Finishes
- Stage Curtain Layout Basics
- Stage Curtain Extras
-
Stage Curtain Resources
add remove
- Get a Quote
Light Source Mega-Track Hanger (Long)
Reference: MTLB
Light Source™ Mega-Track Hangermakes hanging 140 or 300 series track from pipe grids or from individual pipes easy.
Mega-Track Hanger hangs from the upper pipe of the grid and has an offset length from the track to the pipe the diameter of the bottom grid pipe plus 3/16 of an inch. The long Mega-Track hanger has two different track hanging slots so that it will work with either 1-1/2" or 1-1/4" schedule 40 pipe grids. Uses a Mega-Gridlock half to fasten over the pipe and secure from below with four 5/16" socket head screws. The Mega-Gridlock half has slots along the edge that act like a wrench to hold the four Nylock nuts from turning during installation. Only a slight downward pressure with your fingers is required to hold a nut in place for installation. The track hanger slides over the track prior to placing the track in position.
Technical Specifications:
- Use one for every 4 feet of track
- Dimensions:3.65" H x 3.65" W
- Working load limit (WLL):300 lb (136 kg)
- Available in black anodized
*WLL is maximum load that can be applied to the beam clamp which is in "like new" condition and has been properly installed, maintained, and operated.
in the same category
The IWEISS Wall Stabilizer P311 is 1-9/16” DOM tube black finish steel welded to 1/4” plate steel that is meant for insertion into Schedule 40 1-1/2” pipe. It is used as lateral stabilization for pipe grids. Mounting hardware for attachment to structure is not included. Stabilizer can be drilled for a bolted connection, or provided as shown as a solid tub
The IWEISS Wall Flange P310 is comprised of a U-Bolt mounted to angle iron. It is used for lateral stabilization for pipe grids. Mounting hardware for attachment to structure is not included.
Light Source Wall Mount (WM1.5PB) quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations.
Certified to keep your stage safe
Our goal is provide you with the highest quality stage services and products, while ensuring the safety of your staff, performers and guests.